The XC-56 is a monochrome camera module that incorporates a 1/3 type progressive scan CCD. The XC-56 has VGA-class resolution (647 (H) × 493 (V)) output at 30 frames/sec. and 60 frames/sec. by the binning function. • 1/3 type progressive scan CCD • Non-TV format • Square pixel/ Full pixel read-out • VGA-class resolution image output, 30 frames/sec • Partial scanning function • External trigger shutter - Restart/Reset - Mode 1 (Non-reset mode) - Mode 2 (Reset mode) • Various settings are available on the rear panel Image device 1/3 type progressive scan IT CCD Effective picture elements (H) × (V) 659 × 494 Effective lines (H) × (V) 647 × 493 Output image size (H) × (V) VGA class ( 647 × 494 ) Cell size (H) × (V) 7.4 μm × 7.4 μm Lens mount C mount Flange back 17.526mm Sync system Internal/External (automatically switched according to input signal) External synchronization input/output*1 HD/VD (HD/VD level: 2 to 5 Vp-p, 75Ω)* Allowable frequency deviation of external synchronization ±1% (in horizontal synchronous frequency) H jitter Less than 20 ns Scan lines 525-line/236-line (Normal mode/ Binning mode) Video output mode Normal: 1 -line sequential output 29.97 fps / Binning: F2 -line sequential output 59.94 fps Video output 1.0Vp-p, sync negative, 75Ω unbalanced Horizontal frequency 15.734 kHz Output signal frequency 29.97 Hz (Normal mode) 59.94 Hz (Binning mode) Horizontal resolution 500TV lines Sensitivity 400 lx F8 (γ= OFF, FIX GAIN (0 dB)) Minimum illumination 0.5 lx ( F1.4, γ= OFF, GAIN +18 dB ) Video S/N ratio 58 dB (GAIN 0 dB) Gain Fixed/Manually adjustable Gamma OFF (γ =1) (fixed) White clip 820 mV ± 70mV Shutter mode Normal shutter, Restart/Reset, External trigger shutter (Mode 1/Mode 2) Normal shutter speed 1/100, 1/125, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000, 1/15,000 s External trigger shutter DIP switch settings: 1/100, 1/125, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000, 1/25,000, 1/50,000, 1/100,000 s Trigger pulse width settings: 1/4 to 1/100,000 s External trigger Polarity: +, Width: 2 μs to 250 ms, Input impedance: 10kΩ or more (H: +2 to 5.0V, L: 0 to +0.6V) Partial scan R/R mode Binning off: max: 120 fps (Effective line: 102) Binning on: max: 180 fps (Effective line: 59) External trigger Binning off: max: 120 fps (Effective line: 102) (mode 1) Binning on: max: 180 fps (Effective line: 159) Pin assignment Correspondence to EIAJ compliant 12PIN connector pin assignment Unavailable (No.8 pin: Trigger input (G), No.9 pin: Trigger input, No.10 pin: GRD, No.11pin: +12V) Pins No.10 and 11 are not connected inside the camera Power requirements +12 V DC (range: +10.5 to +15.0 V) Power consumption 1.5 W Dimensions 29 (W) × 29 (H) × 30 (D) mm (not including projecting parts) Mass Approx. 50 g Operating temperature −5 to +45ËšC Storage temperature −30 to +60ËšC Performance guarantee temperature 0 to +40ËšC Operating humidity 20 to 80% (no condensation) Storage humidity 20 to 95% (no condensation) Vibration resistance 10 G (20 Hz to 200 Hz 20 minutes for each direction–x, y, z) Shock resistance 70 G MTBF 88,044 hours (Approx. 10.1 years) Regulatory compliance UL6500, FCC/ICES-003 : ClassA, CE : EN61326, AS/NZ : EN61326 Supplied accessories Lens mount cap (1), Operating instructions (1), Lens The Sony XC-56 is the industry standard for machine vision applications requiring a progressive analog CCD camera.
